| SB #500SP Bronze Alloys Display | |||||
| SB Bronze Alloy Standards | SB#500SP | SB#500SP1 | SB#500SP2 | SB#500SP3 | SB#500SP5 |
| OILES#500SP | (High Hard) | ||||
| ISO 1338 Standards | CuZn25Al5Mn4Fe3 | CuSn5Pb5Zn5 | CuAl10Ni5Fe5 | CuSn12 | CuZn25Al5Mn4Fe3 |
| DIN Standards | DIN1709 G-CuZn25Al5 | DIN1705 G-CuSn5ZnPb | DIN17656 G-CuAl10Ni | G-CuSn12 | DIN1709 G-CuZn25Al5 |
| ASTM (UNS) B30-92 Standards | C86300 | C83600 | C95500 | C90800 | C86300 |
| BS Standards | HTB2 | LG2 | AB2 | PB2 | HTB2 |
| Italy JM Standards | JM18-1 | JM1-15 | JM7-15 | JM3-15 | JM18-1 |
| Applicable Conditions | High-load, low speed Commonly used | Mid-load, low speed Commonly used | Mid-load,mid-speed, Commonly used | Mid-load, low speed, Commonly used | Over high load, low speed, High load used |
| Density | 8 | 8.9 | 7.8 | 8.9 | 8 |
| Hardness HB | ＞210 | ＞70 | ＞150 | ＞95 | ＞250 |
| Tensile strength N/mm² | ＞750 | ＞200 | ＞600 | ＞260 | ＞800 |
| Yield strength N/mm² | ＞450 | ＞90 | ＞260 | ＞150 | ＞450 |
| Elongation % | ＞12 | ＞15 | ＞10 | ＞8 | ＞8 |
| Coefficien of linear expansion 10-5/℃ | 1.9 | 1.8 | 1.6 | 1.8 | 1.9 |
| Limit Temp ℃ ℃ | -40~+300 | -40~+400 | -40~+400 | -40~+400 | -40~+150 |
| Max.load N/mm² | 100 | 60 | 50 | 70 | 120 |
| Max.speed (Dry) m/min | 15 | 10 | 20 | 10 | 15 |
| Max.PV N/mm² *m/min | -40~+300 | -40~+400 | -40~+400 | -40~+400 | -40~+150 |
| Compression of permanent deformation 300N/mm² | ＜0.01 | ＜0.05 | ＜0.04 | ＜0.05 | ＜0.05 |
|
|
