Banner 8.2
HX thrust washer, bronze and PEEK lined, marginally lubricated, metric size
HX
Specifications
 
HX thrust washer
Metric Sizes
 
HX thrust washers
Inch Sizes
         
   

  HX thrust washer, bronze and PEEK lined, marginally lubricated, metric size  
Sintered PEEK / PTFE and Sintered Bronze Powder  on Steel Backing
PEEK / PTFE + Bronze Powder + Steel Backing + Copper / Ting-plating

Features
1. HX bearing provides maintenance-free operation;
2. Operate satisfactorily without lubrication under light duty and low speed;
3. HX bearing has a high PV capability under high temperature, from to -150℃ to +250℃;
4. Good chemical resistance;
5. High static and dynamic capacity.
6. No water absorption;
7. Suitable for rotating, oscillationg, reciprocating and sliding movement.


Structures

1. PEEK + PTFE 0.30~0.50mm, gives high wear resistance and low friction even only minute quantities of lubricant are supplied. This bearing surface carries a pattern of circular indents which should be filled with grease on assembly of the bearing.
2. Bronze layer 0.20~0.35mm, provides max. thermal conductivity away from the bearing surface, also serves as a reservoir for the PTFE/PEEK mixture.
3 . Steel backing, provides mechanical strength and high loadcarrying capacity.
4 . Copper/Tin plating 0.002mm, provides good corrosion resistance.


Typical Applications

HX bearings application covered gear pump, ABS system, piston pump, gear motor, machine tools, agricultural machinery and so on.
The materials is recommended with initial pre-lubrication at assembly.


Other Standard HX Shapes

     

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WC08HX WC10HX WC12HX WC14HX WC16HX WC18HX WC20HX WC22HX WC24HX WC25HX WC30HX WC35HX WC40HX WC45HX WC50HX

08HX 10HX 12HX 14HX 16HX 18HX 20HX 22HX 24HX 26HX 28HX 30HX 32HX